systemd.mount

Tartalom

 

Adatok

Licenc: -
Verziószám: -
Fejlesztő/tulajdonos: -

 

 

Man oldal kimenet

man systemd.mount
SYSTEMD.MOUNT(5)                          systemd.mount                          SYSTEMD.MOUNT(5)

NAME
       systemd.mount - Mount unit configuration

SYNOPSIS
       mount.mount

DESCRIPTION
       A unit configuration file whose name ends in ".mount" encodes information about a file
       system mount point controlled and supervised by systemd.

       This man page lists the configuration options specific to this unit type. See
       systemd.unit(5) for the common options of all unit configuration files. The common
       configuration items are configured in the generic [Unit] and [Install] sections. The mount
       specific configuration options are configured in the [Mount] section.

       Additional options are listed in systemd.exec(5), which define the execution environment
       the mount(8) binary is executed in, and in systemd.kill(5), which define the way the
       processes are terminated, and in systemd.resource-control(5), which configure resource
       control settings for the processes of the service. Note that the User= and Group= options
       are not particularly useful for mount units specifying a "Type=" option or using
       configuration not specified in /etc/fstab; mount(8) will refuse options that are not
       listed in /etc/fstab if it is not run as UID 0.

       Mount units must be named after the mount point directories they control. Example: the
       mount point /home/lennart must be configured in a unit file home-lennart.mount. For
       details about the escaping logic used to convert a file system path to a unit name, see
       systemd.unit(5). Note that mount units cannot be templated, nor is possible to add
       multiple names to a mount unit by creating additional symlinks to it.

       Optionally, a mount unit may be accompanied by an automount unit, to allow on-demand or
       parallelized mounting. See systemd.automount(5).

       Mount points created at runtime (independently of unit files or /etc/fstab) will be
       monitored by systemd and appear like any other mount unit in systemd. See
       /proc/self/mountinfo description in proc(5).

       Some file systems have special semantics as API file systems for kernel-to-userspace and
       userspace-to-userspace interfaces. Some of them may not be changed via mount units, and
       cannot be disabled. For a longer discussion see API File Systems[1].

AUTOMATIC DEPENDENCIES
       If a mount unit is beneath another mount unit in the file system hierarchy, both a
       requirement dependency and an ordering dependency between both units are created
       automatically.

       Block device backed file systems automatically gain BindsTo= and After= type dependencies
       on the device unit encapsulating the block device (see below).

       If traditional file system quota is enabled for a mount unit, automatic Wants= and Before=
       dependencies on systemd-quotacheck.service and quotaon.service are added.

       For mount units with DefaultDependencies=yes in the "[Unit]" section (the default) a
       couple additional dependencies are added. Mount units referring to local file systems
       automatically gain an After= dependency on local-fs-pre.target. Network mount units
       automatically acquire After= dependencies on remote-fs-pre.target, network.target and
       network-online.target. Towards the latter a Wants= unit is added as well. Mount units
       referring to local and network file systems are distinguished by their file system type
       specification. In some cases this is not sufficient (for example network block device
       based mounts, such as iSCSI), in which case _netdev may be added to the mount option
       string of the unit, which forces systemd to consider the mount unit a network mount. Mount
       units (regardless if local or network) also acquire automatic Before= and Conflicts= on
       umount.target in order to be stopped during shutdown.

       Additional implicit dependencies may be added as result of execution and resource control
       parameters as documented in systemd.exec(5) and systemd.resource-control(5).

FSTAB
       Mount units may either be configured via unit files, or via /etc/fstab (see fstab(5) for
       details). Mounts listed in /etc/fstab will be converted into native units dynamically at
       boot and when the configuration of the system manager is reloaded. In general, configuring
       mount points through /etc/fstab is the preferred approach. See systemd-fstab-generator(8)
       for details about the conversion.

       The NFS mount option bg for NFS background mounts as documented in nfs(5) is not supported
       in /etc/fstab entries. The systemd mount option nofail provides similar functionality and
       should be used instead.

       When reading /etc/fstab a few special mount options are understood by systemd which
       influence how dependencies are created for mount points. systemd will create a dependency
       of type Wants= or Requires (see option nofail below), from either local-fs.target or
       remote-fs.target, depending whether the file system is local or remote.

       x-systemd.requires=
           Configures a Requires= and an After= dependency between the created mount unit and
           another systemd unit, such as a device or mount unit. The argument should be a unit
           name, or an absolute path to a device node or mount point. This option may be
           specified more than once. This option is particularly useful for mount point
           declarations that need an additional device to be around (such as an external journal
           device for journal file systems) or an additional mount to be in place (such as an
           overlay file system that merges multiple mount points). See After= and Requires= in
           systemd.unit(5) for details.

       x-systemd.requires-mounts-for=
           Configures a RequiresMountsFor= dependency between the created mount unit and other
           mount units. The argument must be an absolute path. This option may be specified more
           than once. See RequiresMountsFor= in systemd.unit(5) for details.

       x-systemd.automount
           An automount unit will be created for the file system. See systemd.automount(5) for
           details.

       x-systemd.idle-timeout=
           Configures the idle timeout of the automount unit. See TimeoutIdleSec= in
           systemd.automount(5) for details.

       x-systemd.device-timeout=
           Configure how long systemd should wait for a device to show up before giving up on an
           entry from /etc/fstab. Specify a time in seconds or explicitly append a unit such as
           "s", "min", "h", "ms".

           Note that this option can only be used in /etc/fstab, and will be ignored when part of
           the Options= setting in a unit file.

       x-systemd.mount-timeout=
           Configure how long systemd should wait for the mount command to finish before giving
           up on an entry from /etc/fstab. Specify a time in seconds or explicitly append a unit
           such as "s", "min", "h", "ms".

           Note that this option can only be used in /etc/fstab, and will be ignored when part of
           the Options= setting in a unit file.

           See TimeoutSec= below for details.

       noauto, auto
           With noauto, this mount will not be added as a dependency for local-fs.target or
           remote-fs.target. This means that it will not be mounted automatically during boot,
           unless it is pulled in by some other unit. The auto option has the opposite meaning
           and is the default.

       nofail
           With nofail, this mount will be only wanted, not required, by local-fs.target or
           remote-fs.target. This means that the boot will continue even if this mount point is
           not mounted successfully.

       x-initrd.mount
           An additional filesystem to be mounted in the initramfs. See initrd-fs.target
           description in systemd.special(7).

       If a mount point is configured in both /etc/fstab and a unit file that is stored below
       /usr, the former will take precedence. If the unit file is stored below /etc, it will take
       precedence. This means: native unit files take precedence over traditional configuration
       files, but this is superseded by the rule that configuration in /etc will always take
       precedence over configuration in /usr.

OPTIONS
       Mount files must include a [Mount] section, which carries information about the file
       system mount points it supervises. A number of options that may be used in this section
       are shared with other unit types. These options are documented in systemd.exec(5) and
       systemd.kill(5). The options specific to the [Mount] section of mount units are the
       following:

       What=
           Takes an absolute path of a device node, file or other resource to mount. See mount(8)
           for details. If this refers to a device node, a dependency on the respective device
           unit is automatically created. (See systemd.device(5) for more information.) This
           option is mandatory.

       Where=
           Takes an absolute path of a directory of the mount point. If the mount point does not
           exist at the time of mounting, it is created. This string must be reflected in the
           unit filename. (See above.) This option is mandatory.

       Type=
           Takes a string for the file system type. See mount(8) for details. This setting is
           optional.

       Options=
           Mount options to use when mounting. This takes a comma-separated list of options. This
           setting is optional.

       SloppyOptions=
           Takes a boolean argument. If true, parsing of the options specified in Options= is
           relaxed, and unknown mount options are tolerated. This corresponds with mount(8)'s -s
           switch. Defaults to off.

       LazyUnmount=
           Takes a boolean argument. If true, detach the filesystem from the filesystem hierarchy
           at time of the unmount operation, and clean up all references to the filesystem as
           soon as they are not busy anymore. This corresponds with umount(8)'s -l switch.
           Defaults to off.

       ForceUnmount=
           Takes a boolean argument. If true, force an unmount (in case of an unreachable NFS
           system). This corresponds with umount(8)'s -f switch. Defaults to off.

       DirectoryMode=
           Directories of mount points (and any parent directories) are automatically created if
           needed. This option specifies the file system access mode used when creating these
           directories. Takes an access mode in octal notation. Defaults to 0755.

       TimeoutSec=
           Configures the time to wait for the mount command to finish. If a command does not
           exit within the configured time, the mount will be considered failed and be shut down
           again. All commands still running will be terminated forcibly via SIGTERM, and after
           another delay of this time with SIGKILL. (See KillMode= in systemd.kill(5).) Takes a
           unit-less value in seconds, or a time span value such as "5min 20s". Pass 0 to disable
           the timeout logic. The default value is set from the manager configuration file's
           DefaultTimeoutStartSec= variable.

       Check systemd.exec(5) and systemd.kill(5) for more settings.

SEE ALSO
       systemd(1), systemctl(1), systemd.unit(5), systemd.exec(5), systemd.kill(5),
       systemd.resource-control(5), systemd.service(5), systemd.device(5), proc(5), mount(8),
       systemd-fstab-generator(8), systemd.directives(7)

NOTES
        1. API File Systems
           http://www.freedesktop.org/wiki/Software/systemd/APIFileSystems

systemd 232                                                                      SYSTEMD.MOUNT(5)

 

 

Kapcsolódó tartalom