postmap

Tartalom

 

Adatok

Licenc:
Verziószám:
Fejlesztő/tulajdonos:

Rövid leírás:

A postmap Linux parancs manual oldala.

 

 

Man oldal kimenet

man postmap
POSTMAP(1)                                            General Commands Manual                                            POSTMAP(1)

NAME
       postmap - Postfix lookup table management

SYNOPSIS
       postmap [-bfFhimnNoprsuUvw] [-c config_dir] [-d key] [-q key]
               [file_type:]file_name ...

DESCRIPTION
       The postmap(1) command creates or queries one or more Postfix lookup tables, or updates an existing one.

       If the result files do not exist they will be created with the same group and other read permissions as their source file.

       While  the  table update is in progress, signal delivery is postponed, and an exclusive, advisory, lock is placed on the en‐
       tire table, in order to avoid surprises in spectator processes.

INPUT FILE FORMAT
       The format of a lookup table input file is as follows:

       •      A table entry has the form

                   key whitespace value

       •      Empty lines and whitespace-only lines are ignored, as are lines whose first non-whitespace character is a `#'.

       •      A logical line starts with non-whitespace text. A line that starts with whitespace continues a logical line.

       The key and value are processed as is, except that surrounding white space is stripped off. Whitespace  in  lookup  keys  is
       supported as of Postfix 3.2.

       When  the  -F option is given, the value must specify one or more filenames separated by comma and/or whitespace; postmap(1)
       will concatenate the file content (with a newline character inserted between files) and will store the base64-encoded result
       instead of the value.

       When  the  key  specifies  email address information, the localpart should be enclosed with double quotes if required by RFC
       5322. For example, an address localpart that contains ";", or a localpart that starts or ends with ".".

       By default the lookup key is mapped to lowercase to make the lookups case insensitive; as of Postfix 2.3 this  case  folding
       happens  only with tables whose lookup keys are fixed-case strings such as btree:, dbm: or hash:. With earlier versions, the
       lookup key is folded even with tables where a lookup field can match both upper and lower case text,  such  as  regexp:  and
       pcre:. This resulted in loss of information with $number substitutions.

COMMAND-LINE ARGUMENTS
       -b     Enable  message body query mode. When reading lookup keys from standard input with "-q -", process the input as if it
              is an email message in RFC 5322 format.  Each line of body content becomes one lookup key.

              By default, the -b option starts generating lookup keys at the first non-header line, and stops when the end  of  the
              message  is  reached.   To  simulate body_checks(5) processing, enable MIME parsing with -m. With this, the -b option
              generates no body-style lookup keys for attachment MIME headers and for attached message/* headers.

              NOTE: with "smtputf8_enable = yes", the -b option option disables UTF-8 syntax checks on query keys  and  lookup  re‐
              sults. Specify the -U option to force UTF-8 syntax checks anyway.

              This feature is available in Postfix version 2.6 and later.

       -c config_dir
              Read the main.cf configuration file in the named directory instead of the default configuration directory.

       -d key Search  the specified maps for key and remove one entry per map.  The exit status is zero when the requested informa‐
              tion was found.

              If a key value of - is specified, the program reads key values from the standard input stream.  The  exit  status  is
              zero when at least one of the requested keys was found.

       -f     Do not fold the lookup key to lower case while creating or querying a table.

              With  Postfix  version 2.3 and later, this option has no effect for regular expression tables. There, case folding is
              controlled by appending a flag to a pattern.

       -F     When querying a map, or listing a map, base64-decode each value. When creating a map from source file,  process  each
              value  as a list of filenames, concatenate the content of those files, and store the base64-encoded result instead of
              the value (see INPUT FORMAT for details).

       -h     Enable message header query mode. When reading lookup keys from standard input with "-q -", process the input  as  if
              it  is an email message in RFC 5322 format.  Each logical header line becomes one lookup key. A multi-line header be‐
              comes one lookup key with one or more embedded newline characters.

              By default, the -h  option  generates  lookup  keys  until  the  first  non-header  line  is  reached.   To  simulate
              header_checks(5) processing, enable MIME parsing with -m. With this, the -h option also generates header-style lookup
              keys for attachment MIME headers and for attached message/* headers.

              NOTE: with "smtputf8_enable = yes", the -b option option disables UTF-8 syntax checks on query keys  and  lookup  re‐
              sults. Specify the -U option to force UTF-8 syntax checks anyway.

              This feature is available in Postfix version 2.6 and later.

       -i     Incremental  mode.  Read entries from standard input and do not truncate an existing database. By default, postmap(1)
              creates a new database from the entries in file_name.

       -m     Enable MIME parsing with "-b" and "-h".

              This feature is available in Postfix version 2.6 and later.

       -N     Include the terminating null character that terminates lookup keys and values. By default, postmap(1)  does  whatever
              is the default for the host operating system.

       -n     Don't  include  the  terminating  null  character that terminates lookup keys and values. By default, postmap(1) does
              whatever is the default for the host operating system.

       -o     Do not release root privileges when processing a non-root input file. By default, postmap(1)  drops  root  privileges
              and runs as the source file owner instead.

       -p     Do  not inherit the file access permissions from the input file when creating a new file.  Instead, create a new file
              with default access permissions (mode 0644).

       -q key Search the specified maps for key and write the first value found to the standard output stream. The exit  status  is
              zero when the requested information was found.

              Note:  this performs a single query with the key as specified, and does not make iterative queries with substrings of
              the key as described for access(5), canonical(5), transport(5), virtual(5) and other Postfix table-driven features.

              If a key value of - is specified, the program reads key values from the standard input stream and writes one line  of
              key  value  output  for  each key that was found. The exit status is zero when at least one of the requested keys was
              found.

       -r     When updating a table, do not complain about attempts to update existing entries, and make those updates anyway.

       -s     Retrieve all database elements, and write one line of key value output for each element. The elements are printed  in
              database order, which is not necessarily the same as the original input order.

              This feature is available in Postfix version 2.2 and later, and is not available for all database types.

       -u     Disable  UTF-8  support.  UTF-8 support is enabled by default when "smtputf8_enable = yes". It requires that keys and
              values are valid UTF-8 strings.

       -U     With "smtputf8_enable = yes", force UTF-8 syntax checks with the -b and -h options.

       -v     Enable verbose logging for debugging purposes. Multiple -v options make the software increasingly verbose.

       -w     When updating a table, do not complain about attempts to update existing entries, and ignore those attempts.

       Arguments:

       file_type
              The database type. To find out what types are supported, use the "postconf -m" command.

              The postmap(1) command can query any supported file type, but it can create only the following file types:

              btree  The output file is a btree file, named file_name.db.  This is available on systems with support for  db  data‐
                     bases.

              cdb    The output consists of one file, named file_name.cdb.  This is available on systems with support for cdb data‐
                     bases.

              dbm    The output consists of two files, named file_name.pag and file_name.dir.  This is available  on  systems  with
                     support for dbm databases.

              hash   The  output file is a hashed file, named file_name.db.  This is available on systems with support for db data‐
                     bases.

              fail   A table that reliably fails all requests. The lookup table name is used for logging only. This table exists to
                     simplify Postfix error tests.

              sdbm   The  output  consists  of two files, named file_name.pag and file_name.dir.  This is available on systems with
                     support for sdbm databases.

              When no file_type is specified, the software uses the database type specified via the default_database_type  configu‐
              ration parameter.

       file_name
              The name of the lookup table source file when rebuilding a database.

DIAGNOSTICS
       Problems  are  logged  to the standard error stream and to syslogd(8) or postlogd(8).  No output means that no problems were
       detected. Duplicate entries are skipped and are flagged with a warning.

       postmap(1) terminates with zero exit status in case of success (including successful "postmap  -q"  lookup)  and  terminates
       with non-zero exit status in case of failure.

ENVIRONMENT
       MAIL_CONFIG
              Directory with Postfix configuration files.

       MAIL_VERBOSE
              Enable verbose logging for debugging purposes.

CONFIGURATION PARAMETERS
       The following main.cf parameters are especially relevant to this program.  The text below provides only a parameter summary.
       See postconf(5) for more details including examples.

       berkeley_db_create_buffer_size (16777216)
              The per-table I/O buffer size for programs that create Berkeley DB hash or btree tables.

       berkeley_db_read_buffer_size (131072)
              The per-table I/O buffer size for programs that read Berkeley DB hash or btree tables.

       config_directory (see 'postconf -d' output)
              The default location of the Postfix main.cf and master.cf configuration files.

       default_database_type (see 'postconf -d' output)
              The default database type for use in newaliases(1), postalias(1) and postmap(1) commands.

       import_environment (see 'postconf -d' output)
              The list of environment parameters that a privileged Postfix process will import from a non-Postfix  parent  process,
              or name=value environment overrides.

       smtputf8_enable (yes)
              Enable preliminary SMTPUTF8 support for the protocols described in RFC 6531..6533.

       syslog_facility (mail)
              The syslog facility of Postfix logging.

       syslog_name (see 'postconf -d' output)
              A  prefix  that  is  prepended  to  the  process  name in syslog records, so that, for example, "smtpd" becomes "pre‐
              fix/smtpd".

SEE ALSO
       postalias(1), create/update/query alias database
       postconf(1), supported database types
       postconf(5), configuration parameters
       postlogd(8), Postfix logging
       syslogd(8), system logging

README FILES
       Use "postconf readme_directory" or "postconf html_directory" to locate this information.
       DATABASE_README, Postfix lookup table overview

LICENSE
       The Secure Mailer license must be distributed with this software.

AUTHOR(S)
       Wietse Venema
       IBM T.J. Watson Research
       P.O. Box 704
       Yorktown Heights, NY 10598, USA

       Wietse Venema
       Google, Inc.
       111 8th Avenue
       New York, NY 10011, USA

                                                                                                                         POSTMAP(1)

 

 

Kapcsolódó tartalom

  •  

 

Címkék