SMBD(8)                                             System Administration tools                                             SMBD(8)

NAME
       smbd - server to provide SMB/CIFS services to clients

SYNOPSIS
       smbd [-D|--daemon] [-F|--foreground] [-S|--log-stdout] [-i|--interactive] [-V] [-b|--build-options] [-d <debug level>]
        [-l|--log-basename <log directory>] [-p <port number(s)>] [-P <profiling level>] [-s <configuration file>]
        [--no-process-group]

DESCRIPTION
       This program is part of the samba(7) suite.

       smbd is the server daemon that provides filesharing and printing services to Windows clients. The server provides filespace
       and printer services to clients using the SMB (or CIFS) protocol. This is compatible with the LanManager protocol, and can
       service LanManager clients. These include MSCLIENT 3.0 for DOS, Windows for Workgroups, Windows 95/98/ME, Windows NT,
       Windows 2000, OS/2, DAVE for Macintosh, and smbfs for Linux.

       An extensive description of the services that the server can provide is given in the man page for the configuration file
       controlling the attributes of those services (see smb.conf(5). This man page will not describe the services, but will
       concentrate on the administrative aspects of running the server.

       Please note that there are significant security implications to running this server, and the smb.conf(5) manual page should
       be regarded as mandatory reading before proceeding with installation.

       A session is created whenever a client requests one. Each client gets a copy of the server for each session. This copy then
       services all connections made by the client during that session. When all connections from its client are closed, the copy
       of the server for that client terminates.

       The configuration file, and any files that it includes, are automatically reloaded every minute, if they change. You can
       force a reload by sending a SIGHUP to the server. Reloading the configuration file will not affect connections to any
       service that is already established. Either the user will have to disconnect from the service, or smbd killed and restarted.

OPTIONS
       -D|--daemon
           If specified, this parameter causes the server to operate as a daemon. That is, it detaches itself and runs in the
           background, fielding requests on the appropriate port. Operating the server as a daemon is the recommended way of
           running smbd for servers that provide more than casual use file and print services. This switch is assumed if smbd is
           executed on the command line of a shell.

       -F|--foreground
           If specified, this parameter causes the main smbd process to not daemonize, i.e. double-fork and disassociate with the
           terminal. Child processes are still created as normal to service each connection request, but the main process does not
           exit. This operation mode is suitable for running smbd under process supervisors such as supervise and svscan from
           Daniel J. Bernstein's daemontools package, or the AIX process monitor.

       -S|--log-stdout
           If specified, this parameter causes smbd to log to standard output rather than a file.

       -i|--interactive
           If this parameter is specified it causes the server to run "interactively", not as a daemon, even if the server is
           executed on the command line of a shell. Setting this parameter negates the implicit daemon mode when run from the
           command line.  smbd will only accept one connection and terminate. It will also log to standard output, as if the -S
           parameter had been given.

       -d|--debuglevel=level
           level is an integer from 0 to 10. The default value if this parameter is not specified is 0.

           The higher this value, the more detail will be logged to the log files about the activities of the server. At level 0,
           only critical errors and serious warnings will be logged. Level 1 is a reasonable level for day-to-day running - it
           generates a small amount of information about operations carried out.

           Levels above 1 will generate considerable amounts of log data, and should only be used when investigating a problem.
           Levels above 3 are designed for use only by developers and generate HUGE amounts of log data, most of which is extremely
           cryptic.

           Note that specifying this parameter here will override the log level parameter in the smb.conf file.

       -V|--version
           Prints the program version number.

       -s|--configfile=<configuration file>
           The file specified contains the configuration details required by the server. The information in this file includes
           server-specific information such as what printcap file to use, as well as descriptions of all the services that the
           server is to provide. See smb.conf for more information. The default configuration file name is determined at compile
           time.

       -l|--log-basename=logdirectory
           Base directory name for log/debug files. The extension ".progname" will be appended (e.g. log.smbclient, log.smbd,
           etc...). The log file is never removed by the client.

       --option=<name>=<value>
           Set the smb.conf(5) option "<name>" to value "<value>" from the command line. This overrides compiled-in defaults and
           options read from the configuration file.

       -?|--help
           Print a summary of command line options.

       --usage
           Display brief usage message.

       --no-process-group
           Do not create a new process group for smbd.

       -b|--build-options
           Prints information about how Samba was built.

       -p|--port<port number(s)>
           port number(s) is a space or comma-separated list of TCP ports smbd should listen on. The default value is taken from
           the ports parameter in smb.conf

           The default ports are 139 (used for SMB over NetBIOS over TCP) and port 445 (used for plain SMB over TCP).

       -P|--profiling-level<profiling level>
           profiling level is a number specifying the level of profiling data to be collected. 0 turns off profiling, 1 turns on
           counter profiling only, 2 turns on complete profiling, and 3 resets all profiling data.

FILES
       /etc/inetd.conf
           If the server is to be run by the inetd meta-daemon, this file must contain suitable startup information for the
           meta-daemon.

       /etc/rc
           or whatever initialization script your system uses).

           If running the server as a daemon at startup, this file will need to contain an appropriate startup sequence for the
           server.

       /etc/services
           If running the server via the meta-daemon inetd, this file must contain a mapping of service name (e.g., netbios-ssn) to
           service port (e.g., 139) and protocol type (e.g., tcp).

       /usr/local/samba/lib/smb.conf
           This is the default location of the smb.conf(5) server configuration file. Other common places that systems install this
           file are /usr/samba/lib/smb.conf and /etc/samba/smb.conf.

           This file describes all the services the server is to make available to clients. See smb.conf(5) for more information.

LIMITATIONS
       On some systems smbd cannot change uid back to root after a setuid() call. Such systems are called trapdoor uid systems. If
       you have such a system, you will be unable to connect from a client (such as a PC) as two different users at once. Attempts
       to connect the second user will result in access denied or similar.

ENVIRONMENT VARIABLES
       PRINTER
           If no printer name is specified to printable services, most systems will use the value of this variable (or lp if this
           variable is not defined) as the name of the printer to use. This is not specific to the server, however.

PAM INTERACTION
       Samba uses PAM for authentication (when presented with a plaintext password), for account checking (is this account
       disabled?) and for session management. The degree too which samba supports PAM is restricted by the limitations of the SMB
       protocol and the obey pam restrictions smb.conf(5) parameter. When this is set, the following restrictions apply:

              •   Account Validation: All accesses to a samba server are checked against PAM to see if the account is valid, not
                  disabled and is permitted to login at this time. This also applies to encrypted logins.

              •   Session Management: When not using share level security, users must pass PAM's session checks before access is
                  granted. Note however, that this is bypassed in share level security. Note also that some older pam configuration
                  files may need a line added for session support.

VERSION
       This man page is part of version 4.9.5-Debian of the Samba suite.

DIAGNOSTICS
       Most diagnostics issued by the server are logged in a specified log file. The log file name is specified at compile time,
       but may be overridden on the command line.

       The number and nature of diagnostics available depends on the debug level used by the server. If you have problems, set the
       debug level to 3 and peruse the log files.

       Most messages are reasonably self-explanatory. Unfortunately, at the time this man page was created, there are too many
       diagnostics available in the source code to warrant describing each and every diagnostic. At this stage your best bet is
       still to grep the source code and inspect the conditions that gave rise to the diagnostics you are seeing.

TDB FILES
       Samba stores it's data in several TDB (Trivial Database) files, usually located in /var/lib/samba.

       (*) information persistent across restarts (but not necessarily important to backup).

       account_policy.tdb*
           NT account policy settings such as pw expiration, etc...

       brlock.tdb
           byte range locks

       browse.dat
           browse lists

       gencache.tdb
           generic caching db

       group_mapping.tdb*
           group mapping information

       locking.tdb
           share modes & oplocks

       login_cache.tdb*
           bad pw attempts

       messages.tdb
           Samba messaging system

       netsamlogon_cache.tdb*
           cache of user net_info_3 struct from net_samlogon() request (as a domain member)

       ntdrivers.tdb*
           installed printer drivers

       ntforms.tdb*
           installed printer forms

       ntprinters.tdb*
           installed printer information

       printing/
           directory containing tdb per print queue of cached lpq output

       registry.tdb
           Windows registry skeleton (connect via regedit.exe)

       smbXsrv_session_global.tdb
           session information (e.g. support for 'utmp = yes')

       smbXsrv_tcon_global.tdb
           share connections (used to enforce max connections, etc...)

       smbXsrv_open_global.tdb
           open file handles (used durable handles, etc...)

       share_info.tdb*
           share acls

       winbindd_cache.tdb
           winbindd's cache of user lists, etc...

       winbindd_idmap.tdb*
           winbindd's local idmap db

       wins.dat*
           wins database when 'wins support = yes'

SIGNALS
       Sending the smbd a SIGHUP will cause it to reload its smb.conf configuration file within a short period of time.

       To shut down a user's smbd process it is recommended that SIGKILL (-9) NOT be used, except as a last resort, as this may
       leave the shared memory area in an inconsistent state. The safe way to terminate an smbd is to send it a SIGTERM (-15)
       signal and wait for it to die on its own.

       The debug log level of smbd may be raised or lowered using smbcontrol(1) program (SIGUSR[1|2] signals are no longer used
       since Samba 2.2). This is to allow transient problems to be diagnosed, whilst still running at a normally low log level.

       Note that as the signal handlers send a debug write, they are not re-entrant in smbd. This you should wait until smbd is in
       a state of waiting for an incoming SMB before issuing them. It is possible to make the signal handlers safe by un-blocking
       the signals before the select call and re-blocking them after, however this would affect performance.

SEE ALSO
       hosts_access(5), inetd(8), nmbd(8), smb.conf(5), smbclient(1), testparm(1), and the Internet RFC's rfc1001.txt, rfc1002.txt.
       In addition the CIFS (formerly SMB) specification is available as a link from the Web page https://www.samba.org/cifs/.

AUTHOR
       The original Samba software and related utilities were created by Andrew Tridgell. Samba is now developed by the Samba Team
       as an Open Source project similar to the way the Linux kernel is developed.

Samba 4.9.5-Debian                                           02/03/2022                                                     SMBD(8)

Használat: smbd [KAPCSOLÓ...]
  -D, --daemon                            Become a daemon (default)
  -i, --interactive                       Run interactive (not a daemon) and log to stdout
  -F, --foreground                        Run daemon in foreground (for daemontools, etc.)
      --no-process-group                  Don't create a new process group
  -S, --log-stdout                        Log to stdout
  -b, --build-options                     Print build options
  -p, --port=SZÖVEG                      Listen on the specified ports
  -P, --profiling-level=PROFILE_LEVEL     Set profiling level

Súgólehetőségek:
  -?, --help                              Ezen súgó megjelenítése
      --usage                             Rövid használati utasítás megjelenítése

Common samba options:
  -d, --debuglevel=DEBUGLEVEL             Set debug level
  -s, --configfile=CONFIGFILE             Use alternate configuration file
  -l, --log-basename=LOGFILEBASE          Base name for log files
  -V, --version                           Print version
      --option=name=value                 Set smb.conf option from command line