Licenc: Szabad szoftver
Verziószám: 4.13 (ennek az oldalnak a készítése idején)
Fejlesztő/tulajdonos: Wine Project



Man oldal kimenet

man wine
WINE(1)                           Windows On Unix                          WINE(1)

       wine - run Windows programs on Unix

       wine program [arguments]
       wine --help
       wine --version

       For  instructions  on passing arguments to Windows programs, please see the
       PROGRAM/ARGUMENTS section of the man page.

       wine loads and runs the given program, which can be  a  DOS,  Windows  3.x,
       Win32 or Win64 executable (on 64-bit systems).

       For debugging wine, use winedbg instead.

       For  running  CUI  executables  (Windows console programs), use wineconsole
       instead of wine.  This will display the output in a  separate  window.  Not
       using  wineconsole  for CUI programs will only provide very limited console
       support, and your program might not function properly.

       When invoked with --help or --version as the only argument, wine will  sim‐
       ply print a small help message or its version respectively and exit.

       The  program  name may be specified in DOS format (C:\\WINDOWS\\SOL.EXE) or
       in Unix format (/msdos/windows/sol.exe).  You may  pass  arguments  to  the
       program being executed by adding them to the end of the command line invok‐
       ing wine (such as: wine notepad C:\\TEMP\\README.TXT).  Note that you  need
       to  '\'  escape  special  characters  (and spaces) when invoking Wine via a
       shell, e.g.

       wine C:\\Program\ Files\\MyPrg\\test.exe

       It can also be one of the Windows executables shipped with Wine,  in  which
       case  specifying the full path is not mandatory, e.g. wine explorer or wine

       wine makes the environment variables of the shell from which it is  started
       accessible  to  the  Windows/DOS  processes started. So use the appropriate
       syntax for your shell to enter environment variables you need.

              If set, the contents of this variable is taken as the  name  of  the
              directory  where  Wine stores its data (the default is $HOME/.wine).
              This directory is also used to identify the socket which is used  to
              communicate  with the wineserver.  All wine processes using the same
              wineserver (i.e.: same user) share  certain  things  like  registry,
              shared  memory, and config file.  By setting WINEPREFIX to different
              values for different wine processes, it is possible to run a  number
              of truly independent wine processes.

              Specifies  the  path  and name of the wineserver binary. If not set,
              Wine will try to load /opt/wine-devel/bin/wineserver,  and  if  this
              doesn't exist it will then look for a file named "wineserver" in the
              path and in a few other likely locations.

              Specifies the path and name of the wine binary to use to launch  new
              Windows  processes.  If  not  set,  Wine will try to load /opt/wine-
              devel/bin/wine, and if this doesn't exist it will then  look  for  a
              file named "wine" in the path and in a few other likely locations.

              Turns debugging messages on or off. The syntax of the variable is of
              the form [class][+|-]channel[,[class2][+|-]channel2]

              class is optional and can be one of the following: err, warn, fixme,
              or trace.  If class is not specified, all debugging messages for the
              specified channel are turned on.  Each channel will  print  messages
              about  a  particular component of Wine.  The following character can
              be either + or - to switch the specified channel on or  off  respec‐
              tively.   If  there  is  no class part before it, a leading + can be
              omitted. Note that spaces are not allowed anywhere in the string.


                     will turn on all warning  messages  (recommended  for  debug‐

                     will turn on DLL warning messages and all heap messages.

                     will turn off all FIXME messages, turn on cursor warning mes‐
                     sages, and turn on all relay messages (API calls).

                     will turn on all relay messages. For more control on  includ‐
                     ing  or  excluding  functions  and dlls from the relay trace,
                     look into the HKEY_CURRENT_USER\Software\Wine\Debug  registry

              For  more  information  on  debugging messages, see the Running Wine
              chapter of the Wine User Guide.

              Specifies the path(s) in  which  to  search  for  builtin  dlls  and
              Winelib  applications.  This  is  a list of directories separated by
              ":". In addition to any directory  specified  in  WINEDLLPATH,  Wine
              will also look in /opt/wine-devel/lib/wine.

              Defines the override type and load order of dlls used in the loading
              process for any dll. There are currently two types of libraries that
              can  be  loaded  into  a  process address space: native windows dlls
              (native) and Wine internal dlls (builtin).  The type may be abbrevi‐
              ated  with  the  first letter of the type (n or b).  The library may
              also be disabled (''). Each sequence of orders must be separated  by

              Each dll may have its own specific load order. The load order deter‐
              mines which version of the dll is attempted to be  loaded  into  the
              address space. If the first fails, then the next is tried and so on.
              Multiple libraries with the same load order can  be  separated  with
              commas.  It is also possible to use specify different loadorders for
              different libraries by separating the entries by ";".

              The load order for a 16-bit dll is always defined by the load  order
              of the 32-bit dll that contains it (which can be identified by look‐
              ing at the symbolic link of the 16-bit file).  For  instance
              if ole32.dll is configured as builtin, storage.dll will be loaded as
              builtin too, since the 32-bit ole32.dll contains  the  16-bit  stor‐


                     Try  to load comdlg32 and shell32 as native windows dll first
                     and try the builtin version if the native load fails.

                     Try to load the libraries comdlg32 and shell32 as native win‐
                     dows  dlls.  Furthermore,  if  an application request to load
                     c:\foo\bar\baz.dll load the builtin library baz.

                     Try to load comdlg32 as builtin first and try the native ver‐
                     sion  if  the  builtin  load  fails;  load  shell32 always as
                     builtin and comctl32 always as native; oleaut32 will be  dis‐

              Specifies  additional path(s) to be prepended to the default Windows
              PATH environment variable. This is a list of Windows-style  directo‐
              ries separated by ";".

              For  a permanent alternative, edit (create if needed) the PATH value
              under the HKEY_CURRENT_USER\Environment registry key.

              Specifies the Windows architecture to support. It can be set  either
              to  win32  (support  only 32-bit applications), or to win64 (support
              both 64-bit applications and 32-bit ones in WoW64 mode).
              The architecture supported by a given Wine prefix is set  at  prefix
              creation time and cannot be changed afterwards. When running with an
              existing prefix, Wine will refuse to start if WINEARCH doesn't match
              the prefix architecture.

              Specifies the X11 display to use.

       OSS sound driver configuration variables:

              Set the device for audio input / output. Default /dev/dsp.

              Set the device for mixer controls. Default /dev/mixer.

              Set the MIDI (sequencer) device. Default /dev/sequencer.

              The Wine program loader.

              The Wine program loader for CUI (console) applications.

              The Wine server

              The Wine debugger

              Directory containing Wine shared libraries

              Directory  containing  the  DOS  device  mappings. Each file in that
              directory is a symlink to the Unix device file implementing a  given
              device.  For  instance, if COM1 is mapped to /dev/ttyS0 you'd have a
              symlink of the form $WINEPREFIX/dosdevices/com1 -> /dev/ttyS0.
              DOS drives are also specified with symlinks; for instance  if  drive
              D: corresponds to the CDROM mounted at /mnt/cdrom, you'd have a sym‐
              link $WINEPREFIX/dosdevices/d: -> /mnt/cdrom. The Unix device corre‐
              sponding  to  a DOS drive can be specified the same way, except with
              '::' instead of ':'. So for  the  previous  example,  if  the  CDROM
              device  is mounted from /dev/hdc, the corresponding symlink would be
              $WINEPREFIX/dosdevices/d:: -> /dev/hdc.

       Wine is available thanks to the work of many developers. For a  listing  of
       the  authors, please see the file AUTHORS in the top-level directory of the
       source distribution.

       Wine can be distributed under the terms of the LGPL license. A copy of  the
       license is in the file COPYING.LIB in the top-level directory of the source

       A status report on many applications is available from the Wine Application
       Database  ⟨⟩.   Please add entries to this list for
       applications you currently run, if necessary.

       Bugs can be reported on the Wine bug tracker ⟨⟩.

       The most recent public version of wine is  available  through  WineHQ,  the
       Wine development headquarters ⟨⟩.

       wineserver(1), winedbg(1),
       Wine documentation and support ⟨⟩.

Wine 4.13                            July 2013                             WINE(1)



Súgó kimenet

wine --help
Usage: wine PROGRAM [ARGUMENTS...]   Run the specified program
       wine --help                   Display this help and exit
       wine --version                Output version information and exit


Kapcsolódó tartalom